Custom Wrought Iron, Pool & Commercial Security Fencing in Santa Fe, NM

If you’ve driven around Santa Fe for more than a week, you already know this town is hard on fences. The sun at 7,000 feet fades and dries out anything cheap within a couple of summers. Afternoon winds off the Sangre de Cristos rattle loose posts. Winter freeze-thaw cycles heave concrete footings that weren’t poured deep enough. And an HOA architectural committee somewhere between the Eastside and Eldorado has probably rejected a fence design for not fitting the neighborhood’s Pueblo or Territorial style.

Baja Fence has installed wrought iron, pool, and commercial security fencing across Santa Fe, from the historic districts near the Plaza to the newer developments off Rodeo Road and out toward Eldorado and Tesuque,  as part of our work serving New Mexico, West Texas, Utah, and Arizona. We offer 100% financing on approved credit, and every job is built to hold up to Santa Fe’s climate specifically, not a generic “Southwest” template.

Custom Wrought Iron Fencing in Santa Fe

Wrought iron is the fence material Santa Fe was practically designed around, it reads as elegant against adobe and stucco without fighting the architecture the way a bright white vinyl fence can. We build:

• Decorative scrollwork and ornamental panels matched to Pueblo, Territorial, or Spanish Colonial exteriors
• Custom entry gates, single and double-drive, with matching pedestrian walk gates
• Full perimeter fencing for residential lots, including uneven or sloped terrain common in the foothills
• Powder-coated finishes rated for high-UV exposure, so you’re not repainting in three years

Every wrought iron installation gets galvanized steel underneath the powder coat, that’s the part that actually prevents rust once monsoon season starts. Post footings are set below Santa Fe’s frost line so gates don’t shift or bind after a hard winter.

See examples of our custom wrought iron gates and railings →

Pool Fencing in Santa Fe, NM — Built to Meet Code, Not Just Look Good

New Mexico pool barrier requirements follow the International Residential Code, and they’re specific:

• Minimum 48-inch height, measured on the side facing away from the pool
• No gaps wider than 4 inches anywhere in the barrier , inspectors literally test this with a 4-inch sphere
• Gates must be self-closing and self-latching, swinging outward, away from the pool
• Ground clearance under the fence can’t exceed 2 inches on non-solid surfaces
• A building permit is required before installation begins

We design every pool fence to clear inspection the first time , no surprise callbacks, no re-work. Beyond code compliance, you get:

• Sightlines that keep the pool visible from the house instead of blocking it off
• Material and finish options that match your existing wrought iron or landscape design
• A layout that adds real resale value instead of looking bolted-on

If your property is inside an HOA (common throughout Santa Fe’s newer subdivisions), we’ll also flag anything your architectural review committee is likely to want documented before you apply for a permit,  that step alone saves most homeowners a month of back-and-forth.

Commercial Security Fencing in Santa Fe

We install perimeter security fencing for office buildings, retail centers, schools, government facilities, warehouses, hospitality properties, and industrial sites throughout Santa Fe and Santa Fe County.

Steel security fencing — maximum strength, anti-climb designs, and finishes built for properties that need to look professional and stay secure for decades, not just years.

Chain link fencing — the most cost-effective option for large perimeters, storage yards, and industrial sites where budget and square footage matter more than aesthetics. Available with privacy slats where visibility needs to be limited.

Santa Fe County also permits coyote fencing in most residential and some mixed-use areas, subject to the same height limits as other fence styles, a detail out-of-state contractors often miss entirely. We build to local code, not a generic national spec sheet.

Learn more about our commercial security fencing and chain link options →

Custom Security Gates & Access Control

A fence is only as secure as its weakest gate. We install:

• Keypad and card-reader entry systems
• Smartphone-controlled and remote access gates
• Intercom systems for visitor screening
• LiftMaster roller gate openers and GhostControl swing gate operators, sized correctly for Santa Fe’s wind loads

Discover our security gate options →

Built for Santa Fe’s Specific Climate — Not “The Southwest” in General

Santa Fe isn’t Phoenix, and it isn’t Albuquerque. At elevation, UV exposure is more intense, nighttime temperature swings are wider, and snow load matters in a way it doesn’t 200 miles south. That’s why every installation includes:

• Heavy-gauge steel components rated for high-UV, high-altitude exposure
• Post footings poured below frost depth to prevent seasonal heaving
• Premium powder-coated finishes that resist fading, not just rust
• Commercial-grade hardware on every gate and hinge point
• Concrete footings sized for the wind loads common along open, unshielded lots

Why Santa Fe Property Owners Choose Baja Fence

• One of a small number of contractors serving the full state, from Santa Fe and Albuquerque down to Las Cruces and Carlsbad, with the crew capacity to handle both residential and large commercial jobs
• 100% financing available on approved credit
• Free, on-site quotes with no pressure to sign the same day
• Every pool fence designed to pass inspection on the first attempt
• LiftMaster and GhostControl automatic gate systems for commercial and residential access control

Get a Free Fencing Quote in Santa Fe, NM

Whether you’re planning custom wrought iron fencing, a code-compliant pool fence, or commercial security fencing for a business property, Baja Fence will give you a straight answer, an accurate quote, and a fence built for how Santa Fe actually wears things down.

Call 575-425-0023 or Request Your Free Quote Online →